Ruckus Wireless ZoneFlex 2925/2942 User Guide | Managing the Access Point
39
Changing the Wireless Mode
1 After opening the Web User interface, click Wireless under Configuration.
2 When the Configure::Wireless::Common workspace appears, review the choices.
FIGURE 4-2
3 Select any of the following modes from Wireless Mode:
Auto-Select: Allows both 802.11g- and 802.11b-compliant devices to connect
to the network. This is the default setting.
2.4GHz 54 Mbps (For faster 802.11g devices only): Allows only 802.11g-compli-
ant devices to join the network.
2.4GHz 11Mbps (For slower 802.11b devices only): Allows only 802.11b-compli-
ant devices to join the network.
4 For information about the remaining common wireless configuration options, see “Cus-
tomizing Common Wireless Configuration” on page 25.
5 Click Update Settings to save and apply the changes.
Changing the Wireless Channel
1 After opening the Web User interface, click Wireless under Configuration.
2 When the Configure::Wireless::Common workspace appears, review the options.
3 Open the Channel menu and select the channel used by the network.
• You can choose SmartSelect, or choose one of a specific number of channels. If you
choose SmartSelect, the AP selects the best channel (encountering the least inter
-
ference) to transmit the signal.
4 Click Update Settings to save and apply the changes.
Comments to this Manuals