Ruckus Wireless ZoneFlex 7363 User Manual download pdf (Page 5)

VIEW Certified Configuration Guide: Ruckus Wireless

721-1004-000-E.docx

August 2014 5

Handset* models tested:

Spectralink 8020/8030

Handset radio mode:

802.11b/g/n

802.11a/n

Meets VIEW minimum call capacity per

AP:**

6 with Wi-Fi Std QoS

8 with Wi-Fi Std QoS

* Spectralink handset models and their OEM derivatives are verified compatible with the WLAN

hardware and software identified in the table. Throughout the remainder of this document they

will be referred to collectively as “Spectralink Wireless Telephones”, “phones” or “handsets”.

The 8440, 8441 (8440 with personal alarm hardware), 8450 (with 1D bar code reader), 8452

(with 1D and 2D bar code reader), and 8453 (8452 with personal alarm hardware) handsets will

be referred to collectively as the 84-Series handsets. The 8741 and 8753 (with 2D bar code

reader) will be referred to collectively as the 87-Series handsets.

** Maximum calls tested per the VIEW Certification Test Plan. The certified product may actually

support a higher number of maximum calls

***WPA2-Enterprise and Wi-Fi Standard QoS are not available for Spectralink 8020/8030

handsets connecting to PBXs using the TDM protocol through a Spectralink Telephony

Gateway (phone type 30 on the 8020/8030).

Known Limitations

 ChannelFly and Background scanning should be disabled with Spectralink.

 8020/8030 handsets are not compatible with the N-Only AP mode. 84- and 87-series

handsets may be used with the N-Only AP mode.

 In the current software release, the Spectralink compatible setting in the AP Group

should NOT be checked. This is scheduled to be corrected in a future version of the

Zone Director software so that the setting changes performed by cli below will not be

necessary.

Spectralink References

All Spectralink support documents are available at http://support.spectralink.com.

1 2 3 4 5 6 7 8 9 10 ... 29 30

No comments

Ruckus Wireless ZoneFlex 7363 User Manual Page 5