Ruckus Wireless ZoneFlex 7363 User Manual download pdf (Page 27)

721-1004-000-E.docx

August 2014 27

Chapter 6: AP Configuration

AP Group Setup

Call Admission Control (CAC) can be configured for an AP group instead of configuring at

individual AP. However, configuration at individual AP radio supersedes the configuration at AP

group. This configuration ensures all configured APs in the AP group to have same CAC setting

instead of configuring CAC for individual APs.

AdminTip: 87-Series (PIVOT) does not support CAC

CAC must not be enabled on an SSID that 87-Series will use to connect. The

feature is scheduled for future implementation.

1 Navigate to Configure> Access Points.

2 In the main screen, go to Access Point Groups.

3 Click Edit for the AP group where CAC is required.

4 Under Radio Settings, go to Call Admission Control and choose the required CAC %

limit per radio. Use 10% for the 8020/8030 handsets and 20% for the 84-Series

handsets. If both types of handsets are present, use the smaller number.

5 Set SpectraLink Compatibility to Disable.

AdminTip: SpectraLink Compatibility not finished

The SpectraLink Compatibility setting is designed to automatically set most of the

cli settings described in this guide. It is not yet finished and will be available in a

future release of Ruckus Zone Director software. Currently, it will compromise

network performance.

6 Click OK to save the changes

1 2 ... 22 23 24 25 26 27 28 29 30

No comments

Ruckus Wireless ZoneFlex 7363 User Manual Page 27