68
Configuring the Access Point
Configuring WLAN Settings
Figure 33. WEP settings
Using WPA
Use of WPA (Wi-Fi Protected Access) or WPA2 provides enhanced security over WEP,
and allows client authentication based on either a pre-shared key (PSK), for home or
small office networks, or an external authentication server such as a RADIUS server,
for corporate networks.
To configure WPA security settings
1. Go to Configuration > Wireless. The Configuration :: Wireless :: Common page
appears.
NOTE: If you are using a ZoneFlex 7363/7762/7962 AP, go to Configuration > Radio
2.4G or Configuration > Radio 5G.
2. Click the Wireless # tab that you want to configure. The Configuration :: Wireless
:: Wireless[#] page appears.
3. Select WPA from the Encryption Method drop-down menu. An additional set of
WPA-specific encryption options appears on the page.
Comments to this Manuals