Ruckus Wireless Metro Broadband Gateway User's Guide download pdf (Page 50)

50 MM2211 Wireless Broadband Gateway User’s Guide 8000013, December 2006

Updating the Firmware

Figure 25—Updating the Firmware

Automatic Firmware Upgrade

The Host Name, User Name, and Password shown in the window of Figure 25 have been preconfigured to

automatically access Ruckus Wireless’s firmware update website. You can alternatively change these parameters

to access a different firmware upgrade website.

You can perform an immediate firmware upgrade by clicking Firmware Upgrade Now. The MM2211 will

proceed with a firmware upgrade at the host specified.

The default for checking for new updates is 12 hours, as shown in the Check Interval box. You can set this

to a longer or shorter interval as required.

1. If you are satisfied with the automatic firmware upgrade parameters, click Update. The system will update

the firmware as required.

Manual Firmware Upgrade

Contact your service provider for more information about Web sites or TFTP/FTP sites used to store

firmware images for the MM2211 Gateway.

CAUTION:—If you have recently made configuration changes to the MM2211 Gateway, make sure to reboot

the system (see “Rebooting the System” on page 54) first so that your changes are preserved. Then update the

firmware.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 56 57 58

No comments

Ruckus Wireless Metro Broadband Gateway User's Guide Page 50