Ruckus Wireless Metro Broadband Gateway User's Guide download pdf (Page 24)

24 MM2211 Wireless Broadband Gateway User’s Guide 8000013, December 2006

Configuring the MM2211 Gateway

This section describes the tasks and screens used to customize the MM2211 Gateway configuration to run

on your wireless network.

Review the following topics before you change any system configuration settings:

• "Connecting to the MM2211 Gateway" on page 15

• "Connect and Configure Your Ruckus MM2211 Gateway" on page 16.

System Configuration

Table 5, “MM2211 Gateway Default and User Settings Worksheet,” on page 21 shows the default settings

used to login to the device.

A minimum set of configurations is required to put the MM2211 Gateway into operational mode. The system

provides the default settings for these configuration items. You should change the default settings where

necessary to match your own wireless network’s configuration, and to protect your privacy.

A system reboot is required for configuration changes to take effect. Perform the following steps to configure

the MM2211 Gateway:

1. Connect to the MM2211 adapter by following the instructions in "Connecting to the MM2211 Gateway" on

page 15.

2. Choose Configuration->System. The window of Figure 7 appears.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 57 58

No comments

Ruckus Wireless Metro Broadband Gateway User's Guide Page 24